Download

v0.3.3 · beta

Microsoft Store

Signal Visor is distributed through Microsoft Store. This is the first beta release: the analysis is complete and tested, and live reception has been tried on a real Pluto+, HackRF One and RTL-SDR – but it is new, and reports of anything that does not work as described are welcome. Updates are delivered through the Store.

Open in Microsoft Store

No radio is needed to try it: the Demo button opens recordings that ship with the program. For live reception, see what each receiver needs below.

What it needs

SystemWindows 10 or 11, 64-bit
RadioNone, to analyse files. Any receiver that writes IQ – RTL-SDR, HackRF, Pluto – or a Flipper Zero for .sub files.
For live receptionOne of: an ADALM-Pluto or Pluto+ on the network (no driver; libiio is included); a HackRF One on USB (WinUSB driver; libhackrf is included); an RTL-SDR on USB with the WinUSB driver from Zadig and rtl_tcp, which you install separately.
DiskSmall. Recordings are read in place and never copied.

What is not in it

Free, no account, no telemetry – see Privacy.

Release notes

What's new in Signal Visor

$ v0.3.3 · first beta
  • Recordings from any receiver: IQ files (.cu8, .cs8, .cs16, .cf32, SigMF) and Flipper Zero .sub RAW. Bursts are found and measured – timing, jitter, frequency offset, signal-to-noise ratio, occupied bandwidth.
  • Modulation from the signal: OOK/ASK, 2-FSK, 4-FSK, BPSK/QPSK/8-PSK and an unmodulated carrier, or chosen by hand in Analyze as; Trace shows the amplitude or the instantaneous frequency to check it.
  • Protocols: fourteen definitions on GitHub (ten verified), ranked with an explanation of each score. Readings the signal cannot tell apart, such as EV1527 and PT2262, are shown as such. KeeLoq and other rolling codes are recognised and split into their parts, never decrypted.
  • Decoded bits for unknown devices: bits read from pulse lengths (PWM, PPM), frames compared with what changes marked, checksum search that also derives an unknown CRC, correlation with values you measured, named fields.
  • Protocol workspace: definitions as readable JSON, edited with a live preview; a draft made from the Bits workspace already decodes the recording it came from.
  • Live reception from an ADALM-Pluto / Pluto+, a HackRF One or an RTL-SDR (through rtl_tcp), with lost samples detected two ways and reported. How to connect →
  • Exports to rtl_433, ESPHome, RCSwitch, Flipper .sub, CSV and PNG; sessions that keep the whole sequence of work; demo recordings to try it without a radio.